Toronto King Blue by Greenland | 155.75m | 48s | Greenland | Arcadis

DavidCapizzano said:
They are hand laid bricks, but the bricks themselves are really really big compared to the size of the bricks on the historic facade (almost block sized). It's a small detail, but I do wish they had used the same size stock for the additions.
Click to expand...
416ForLife said:
Are they not hand laid in blocks and then hoisted into place as a large slab of laid brick?
Click to expand...

King Portland Centre and Kingly Condos | 57.6m | 15s | Allied | Hariri Pontarini

Yeah but it's still a phony way to make a structure look like it's bricked, just like modern kitchen cabinets made from particle board with a nice veneer ... nothing beats a bunch of bricklayers on scaffolds laying the real thing:cool: Why does it matter how it's done? When those bricklayers...
urbantoronto.ca urbantoronto.ca

On this page you can see how thin the "brick" is in certain places (3/4 down the page) Not saying the whole building is like this as I believe there are three types on that building. hand laid, prefab (pressed concrete pattern) and totally fake.
Not sure the process they are using on this building as I haven't gone back through the thread, but probably one of these. Fairly common these days.
 
You end up with something blocky like this .... and it looks terrible
Screen Shot 2019-09-27 at 4.00.16 PM.png
 
416ForLife said:
You end up with something blocky like this .... and it looks terribleView attachment 206040
Click to expand...

Those are required for drainage, thermal breaks and support for the bricks. In the article attached bricks can only be supported so high 50ft (15m) before needing a support angle (structure) to continue and basically repeat the next 50ft. At this point you have a break in the fascade and need flashing to let the water that has penetrated behind the brick out, which is usually at these points. If you look at most highrise brick buildings these are there. Some more visible than others.


I am sure I am missing some information as well.
I do agree it isn't the prettiest thing to look at, but better than a failing exterior system. :)
 
Ok. That was very insightful. Those gaps are something I don't notice in most older buildings though. But, if for the sake of regulation, it has to be, then it has to be......
 
Red Mars said:
Pics taken May 1, 2018


OkJGYu6.jpg



C5843fY.jpg



EhEGuna.jpg
Click to expand...
ProjectEnd said:
That's a different project(?).

Go a couple of pages back. You can see plenty of pictures of the scaffolding and elevated stages for hand laying here.
Click to expand...

Yes, a different project. Was just stating that exterior brick walls are not always laid by hand brick. The photo above shows them installing "brick" columns.
Was just trying to be informative.
 
Not impressed particularly . Looks like no retail or restaurant on the lower floors which is a drag considering the sizeable space it takes up and the fabric of the area....
 
416ForLife said:
Not impressed particularly . Looks like no retail or restaurant on the lower floors which is a drag considering the sizeable space it takes up and the fabric of the area....
Click to expand...

From a post I made a while back:
westtoeast said:
I didn't realize how many retail/restaurant spaces would come with this development - can't wait to see what goes here!

View attachment 175744
Click to expand...
^5-8 retail/restaurant spaces depending on the dividing walls it looks like
 
Really... I walk by this every day, and can't see it..... however, I've never looked at the master plan. 5-8 would be amazing.
 
You must log in or register to post here.

Back
Top