Toronto Pinnacle One Yonge | 351.85m | 106s | Pinnacle | Hariri Pontarini

Question as I know that there are a few people in this form that are actually involved in this project and if you can't answer I understand. Is there any specialty forming systems that will be used on this project once it gets up to a taller height as was done at the one? Looking back at the pictures, it was once the building bought into its final floor plan that the climbing forms were installed. I might just be speculating but would love to find out
 
mburrrrr said:
A work of beauty.
View attachment 514001

View attachment 514003

Finally a closer look. Is this the end cap buried in the transfer slab? .
View attachment 514002


Looks like they couple the horizontal bars too. The forefront bars seem higher.
I’m so fascinated by the tension system. I still want to learn more…… maybe a UT inside story someday.
View attachment 514000

New green crane lighting. Occupancy approaching the top.
View attachment 514004
Click to expand...

Those are couplers, the bars were trimmed so the steel bars (the long 16 meter slab bars with the couplers) could be lifted over them by the workers, eventually bars will be added so they will be the same height as the bars in the forefront.

Collingwoodbuildinglover said:
Question as I know that there are a few people in this form that are actually involved in this project and if you can't answer I understand. Is there any specialty forming systems that will be used on this project once it gets up to a taller height as was done at the one? Looking back at the pictures, it was once the building bought into its final floor plan that the climbing forms were installed. I might just be speculating but would love to find out
Click to expand...

Yes, like phase one.
 
BoomOne said:
Those are couplers, the bars were trimmed so the steel bars (the long 16 meter slab bars with the couplers) could be lifted over them by the workers, eventually bars will be added so they will be the same height as the bars in the forefront.



Yes, like phase one.
Click to expand...
Thank you very much boom one I knew that you would have the answer
 
BoomOne said:
Those are couplers, the bars were trimmed so the steel bars (the long 16 meter slab bars with the couplers) could be lifted over them by the workers, eventually bars will be added so they will be the same height as the bars in the forefront.



Yes, like phase one.
Click to expand...
Wow. Not the answer I was expecting but that makes sense. Thanks!
 
Will there actually be curved glass on this one ?
 
Did they look at the calendar last week and plan all this work for today?
New sign, new benches, new windows.

_N8A2007.jpeg



_N8A2016.jpeg



_N8A2010.jpeg



_N8A2009.jpeg



_N8A2015.jpeg



_N8A2005.jpeg



_N8A1896.jpeg



_N8A2017.jpeg



_N8A2000.jpeg
 
BoomOne said:
Those are couplers, the bars were trimmed so the steel bars (the long 16 meter slab bars with the couplers) could be lifted over them by the workers, eventually bars will be added so they will be the same height as the bars in the forefront.



Yes, like phase one.
Click to expand...
Looks like tough work. This took over 10 seconds of lifting from these two pictures. I’m not sure where or when they started … or how.
_N8A2064.jpeg



_N8A2067.jpeg

Collingwoodbuildinglover said:
When do we think they will be pouring that transfer slab? Given the front pace? I am going to say next Friday
Click to expand...
It looks like they have a long slug ahead still.
 
You must log in or register to post here.

Back
Top